Mark Up an Attachment

RIB CX Mobile gives you a number of different ways to mark up a photo you take in the field or an existing image attachment.

Please note - at the time of writing you can only mark up image files.

There are different type of marks ups you can perform

1. To change the option from the default, tap on the mark up options panel that is shown on screen.

2. This will show you all the available mark up options.

3. Pick a colour.

4. Click on either square, arrow, circle, text or squiggle.

5. Once selected, tap on the screen and drag your finger to draw the mark up.

6. Click Save.

7. Marked up attachment is added to the Document.

1. Go to attachment tab.

2. Click on the Camera icon.

3. Select take a photo.

4. Take the photo. If you are happy with the photo, select Use Photo.

5. Click on the paint tool top right hand corner.

6. The mark up tool will be shown as a panel on the right side of the screen.

7. By default the mark up is a red arrow. So just tap anywhere on the photo and draw an arrow.

8 You can also click undo on the mark up page to remove the last mark up you did.

9. Once you are satisfied with the mark up you can click save and the mark up will be saved on the attachment.

Please note once the mark up has been saved you cannot open it again and undo your changes.

1. Tap on the attachment tab.

2. Tap on the image attachment you want to mark up.

3. Click on the Paint pallet icon on the top right.

4. Follow the same steps as above for marking up a new attachment.

5. Click Save.

Once you have finished marking up the attachment and want to submit the form.

Click Save and then Save and Close or Save and Create New.