Inspecting and Closing Defects is easy with iTWOcx Mobile.

Inspecting a Defect

First we need to find the Defects we want to Inspect. To do this search the Defect list for the Location you are working in

1. Go to the Search page for Defects
2. Select the Location you want 
3. Select the Status as Ready to Inspect
4. Click Search

Inspecting the Defect

You are now on a list of Defects which can be inspected. From the List of Defects select the Defect you want by tapping on the Document row

1. This will open the Defect
2. Select the Status row
3. If the work has been satisfactorily done, Select Status Resolved
4. Tap on Save

This will change the Status of the Defect to Resolved and update the changes to iTWOcx.

When work is not completed

If the work by the sub contractor has not been done satisfactory you can Fail the inspection.

To Fail a Defect inspection

Select the defect you want from the list

1. Select the Status row 
2. Change the Status back to Issued for Repair
3. Tap on Save to upload the changes to iTWOcx

Suggested Topics

Unable to render {children}. Page not found: Inspect and Close Defects.