Inspecting and Closing Defects is easy with iTWO cx Mobile.
Inspecting a Defect
First we need to find the Defects we want to Inspect. To do this search the Defect list for the Location you are working in
...
3. Select the Status as Ready to Inspect
4. Click Search
Resolving the Defect
You are now on a list of Defects which can be inspected. From the List of Defects select the Defect you want by tapping on the Document rowSelect the Defect from the list that you want to inspect.
1. This The defect will open the Defect.
2. Select the Status row
3. If the work has been satisfactorily done, Select Status Resolved
4. Tap on Save
This will change the Status of the Defect to Resolved and update the changes to iTWOcx.
When work is not completed
If the work by the sub contractor has not been done satisfactory you can Fail the inspection.
To Fail a Defect inspection
Select the defect you want from the list
1. Select the Status row
2. Change the Status back to Issued for Repair
3. Tap on Save to upload the changes to iTWOcx
Suggested TopicsOnce you have inspected the defect, click on the 3 dots select either pass or fail.
Defect Has Been Rectified
1. To pass the defects, simply click on the Pass button.
2. Confirm your selection.
3. The status changes to RECTIFIED and closes the defect.
Defect Has Not Been Completed
1. To Fail the defect, simply click on the Fail button.
2. Confirm your selection.
3. The status changes to ISSUED FOR REPAIR and returns it to the subcontractor for re-work.
This cycle continues until the defect repair is deemed to be RECTIFIED by the Defect Manager.