iTWocx Mobile gives you a number of different ways to mark up a photo you take in the field or an existing image attachment.
| Info |
|---|
| Please note - at the time of writing you can only mark up image files |
Mark up new Photo
Here is how you do it.
1. Go to attachment tab.
2. Click on the Camera icon
3. Select take a photo
4. Take the photo. If you are happy with the photo, select Use Photo.
...
Immediately you will be taken to a screen with the mark up tool
1. The mark up tool will be shown as a panel on the right side of the screen
2. By default the mark up is a red arrow. So just tap anywhere on the photo and draw an arrow
3. You can also click undo on the mark up page to remove the last mark up you did.
4. Once you are satisfied with the mark up you can click save and the mark up will be saved on the attachment
| Info |
|---|
| Please note once the mark up has been saved you cannot open it again and undo your changes. |
...
Mark up options
There are different type of marks ups you can perform
...
Draw an Arrow
...
Draw a square
...
Draw a Circle
...
Change Colors
...
Change the thickness of the line
1. To change to the mark up type you want from the default, Tap on the Mark up options panel that is shown on screen
2. This will show you all the available mark up options
3. Pick a color
4. Click on either square, arrow or circle
5. Change thickness of line by dragging the up icon up or down. Up if less thickness, Down is more thickness
6. Once selected, tap on the screen and drag your finger to draw the circle
7. Click Save
8. Marked up attachment is added to the Document
...
...
Marking up an existing attachment
1. Tap on the attachment tab
2. Tap on the image attachment you want to mark up
3. Click on the Paint pallet icon on the top right
4. Follow the same steps as above for marking up a new attachment
5. Click Save
...
Once you have finished your mark up;
1. Click Save
2. Save and Close to upload the document
