...
6. Fill in the details and submit the form to save the Pin
Pin any form to a plan
With this release of the mobile application, we have extended the ability to add a pin to a plan by supporting adding any form type as a pin on a drawing.
Configuration
For details of configuration and set up, click here.
The configured plans on the online version of iTWO cx are what will be used on the mobile application as well.
Drawings Tab
We've also added a new tab to the home screen to allow you quick access to configured plans right from the home screen of the app.
This screen has been divided into two parts;
- Plans
This tab will display any specific plans you have configured under the plans configuration.
- Publication Space.
Will give you quick access to the publication space to find any drawings you with to add pins to.
Adding a pin
From Drawings tab
If specific plans have been added in the configuration, these plans will be shown in the Plans tab in the Drawings section.
To add a pin, open the drawing
Click on the mark up tools and select the pin icon
Then tap on the relevant location on the drawing to add the pin
This will pop up a screen that shows you the most recently created form types
You can also search for the form type you wish to add as a pin
Select the form type you wish to add as a pin and submit that form.
View a pinned form
To view a pinned form simply tab on the pin that you wish to view.
Each pin displays the form type code to give you an indicator as to what type of form it is. Eg DEF (for Defect).
Filter pins
You can filter the pins shown on the drawing preview by clicking on the Filter icon
Filtering options available are
- By status
- And form type
Move Pins
You can also reposition already added pins by selecting the move option from the mark up tools
Which shows you the pins in their movable state. From here you can drag and drop the pins to the location you require.
Click save to save your changes
